HOW TO ADD OIL:
Step 1. To avoid oil spill, make
sure engine is off and in the
correct position using the
kickstand as shown on the
picture below.
Step 2. To check oil level, use
oil filler cap/dipstick to see
how much oil is needed.
Step 3. Slowly
Fill engine with
4-stroke automotive SAE 10W-30
detergent oil.
Start with less
than 2.7 US ounces and fill to
the bottom edge of the oil fill
hole as shown on the picture
below.
Step 4. Reinstall the oil
filler/dipstick securely. If any
oil is spilled, make sure to
wipe it up.
NOTICE:
Running the engine with low or
excessive oil level can cause
engine damage. This type of
damage is not covered by the
Distributor’s Limited Warranty.
FOR MAINTENANCE:
Check the engine oil level
before each use, or every 10
hours of operation.
