7
Operating the Power Nozzle
Carpet height adjustment
•
Your power nozzle has six different
settings to clean a variety of carpet
types and floor surfaces. To adjust
the carpet height setting of the power
nozzle, press the pedal located on the
right rear side of the power nozzle (see
diagram). Each press of this pedal will
adjust the height to the next carpet
height position.
• To determine which setting you are
currently on, look through the height
indicator window on the top of the unit
(see diagram). You will see one of the six
settings detailed below:
Setting:
Intended Use:
1. XHI
Very plush carpet
2. HI
Plush carpet
3. Auto
Standard carpet thickness
or bare floors
4. MED
Medium pile carpet
5. LO
Low pile carpet
6. XLO
Indoor / outdoor carpet
Carpet height adjustment notes:
•
When using the power nozzle, start on
the “auto” setting. If pushing the power
nozzle forward feels sluggish or hard
to push, then adjust to a higher setting
(i.e. HI or XHI). If the power nozzle
feels very easy to push, you may want
to lower the power nozzle for more
effective cleaning. The “Auto” setting is
the recommended setting for bare floor
surfaces (i.e. tile, vinyl, wood).
Diagram 6
XHI
HI
AUTO
MED
LO
XLO
Diagram 7
