6
Assembling the
wand
• Insert the wand into
the power nozzle
neck until the button
clicks and locks
into place inside the
neck.
• Starting at the guide
on the power nozzle
neck, thread the
power cord through
the guides on the
back of the wand.
• Insert the plug on the end
of the cord through the plug
holder at the top of the wand.
This step may be easier with
the wand fully extended.
Attaching the hose
• Locate a vacuum port and lift the
port lid. Insert the hose into the port.
For models with a power cord, it is
necessary to plug the power cord into
an electrical outlet.
• Insert the hose handle into the plug at
the top of the wand.
Using the power nozzle
• Turn on the power nozzle by pushing
the on/off switch located on the hose
handle. Release and lower the wand by
pressing the handle release pedal on
the left rear side of the power nozzle.
Removing / Inserting the wand from
the power nozzle
• Removing the wand from the power
nozzle allows you to use accessory
tools for baseboard or ceiling cleaning.
• Turn the power nozzle off by pushing
the on/off switch located on the hose
handle.
• Push the wand extension button to
collapse the wand to its shortest height.
• Unthread the power cord from the guide
on the power nozzle neck and from the
guides on the back of the wand.
• Gently pull the plug from the plug holder
at the top of the wand.
• To reinsert the wand into the power
nozzle, repeat the steps for assembling
the wand.
Adjusting the wand
• The telescopic wand is easily adjustable
so you can choose any wand length
necessary for your cleaning task. Push
the wand extension button to extend
the wand or to collapse it to its shortest
height for easy storage.
Assembling and Operating the Power Nozzle & Wand
Diagram 3
