6. Do not use the spray gun to spray flammable liquids. Do not clean the spray gun with flammable
solvents.
7. Pay attention to the risks presented by the material to be sprayed, read the markings on the
packaging or the information provided by the manufacturer of the material.
Do not spray any liquid materials whose risks are not clearly identified. Materials not identified may
create hazardous conditions.
8. Do not spray near ignition sources such as electricity sparks (generated by plugging or unplugging
electric power cords, or operating switches or power tools ...), open fires, fireplaces, embers, naked
flame, cigarettes, hot objects, ... Such sparks and sources can cause a fire.
9. Do not point the spray gun or spray to oneself or to any other person or to animals.
Keep your hands and other body parts away from the spray jet.
If the spray jet should penetrate the skin, seek medical attention immediately.
In case of accidental contact with skin or eyes, follow the safety instructions written on the packaging
of the applied product. Seek immediate medical attention
10. Residual risks
Even when the tool is used as prescribed it is not possible to eliminate all residual risk factors. The
following hazards may arise in connection with the tool’s construction and design:
a. Damage to lungs if an effective dust mask is not worn.
b. Damage to hearing if effective hearing protection is not worn.
c. Health defects resulting from vibration emission if the power tool is being used over longer period
of time or not adequately managed and properly maintained.
d. Health hazard resulting from the vapours evaporating from the used spraying product.
11. Wear hearing protection while operating the power tool.
12. The declared vibration total value has been measured in accordance with a standard test method
and may be used for comparing one tool with another.
The declared vibration total value may also be used in a preliminary assessment of exposure.
Warning
The vibration emission during actual use of the power tool can differ from the declared total value
depending on the ways in which the tool is used.
There is the need to identify safety measures to protect the operator that are based on an estimation of
exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running idle in addition to the trigger time).
13. WARNING!
This machine produces an electromagnetic field during operation. This field may under some
circumstances interfere with active or passive medical implants. To reduce the risk of serious or fatal
injury, we recommend persons with medical implants to consult their physician and the medical
implant manufacturer before operating this machine
3.3.3) Maintenance
1. Maintain tool with care
Keep tool clean for better and safer performance.
Follow instructions for lubrication and changing accessories.
Keep handles dry, clean and free from oil and grease.
Ensure that ventilation slots are kept clean and free from dust at all times (to avoid product from
overheating)
Do not clean spray gun with flammable solvents.
Keep power plug and On/Off switch away from paint and any other liquids. In doing so, you
will reduce electric shock hazards.
2. Have your tool repaired by a qualified person
Unless otherwise indicated in this instruction manual, repairs or replacement of any damaged part
in an authorised service centre is recommended.
Page
7
/
24
