Ribimex D18-08 User And Maintenance Manual Download Page 16

Page 

16

 / 

29

 

 

d) If the power cord or the plug becomes damaged, stop using the charger until it has been 
repaired by a qualified person. If the supply cord is damaged, it must be replaced by the 
manufacturer or its authorized service center, in order to avoid a hazard..

 

Electric shock 

hazard.

 

e) Only use the charger provided with the tool, or a same type or same model charger to 
charge the battery. 

The use of other types of charger increases the risk of electric shock, 

personal injury and damage.

 

f) Never attempt to recharge non-rechargeable batteries. 

Batteries may explode

 

g) Only use the charge at ambient temperatures b10

°°°°

C and +40

°°°°

C. Store charger in 

a dry location protected from cold where temperature would not 40

°°°°

C. 

To prevent any 

damage to the charger. 

h) The charger is intended for indoor use only. Place charger on solid, flat non-flammable 
surface and away from any flammable materials when re-charging the battery pack. 
Do not recharge the battery pack in a wet or humid environment. 

The charger and battery 

pack may heat during charging process.  

 

2) Battery 
a) Do not attempt to open the battery. If the battery is damaged in any way, stop using it and 
do not attempt to recharge it.

 

Short-circuit or electric shock or explosion hazard. Discard it 

according to local laws.

 

b) Protect the battery pack against any heat source (e.g. direct sunlight exposure, fire, 
heater…). Do NOT incinerate the battery pack. 

To prevent any damage or explosion hazard. 

 

c) Do not expose the battery pack to water, moisture and cold.

 To prevent any damage.

 

d) In case of damage and improper use of the battery, vapours may be released. Ensure 
proper ventilation and provide for fresh air to the work area. 

The vapours can irritate the 

respiratory system.

 

e) Only use the battery pack provided with the tool. 

The use of other types of batteries may 

increases the risk of electric shock, personal injury and damage.

 

f) Use only original batteries or recommended by the manufacturer with the voltage 
matching your tool, as listed on the nameplate. 

When using other batteries (e.g. reconditioned 

batteries or other brands), there is risk of explosion causing injury or property damage. 

g) Charge battery pack only at ambient temperatures b10

°°°°

C and +40

°°°°

C. Store the 

battery in a dry location protected from cold where temperature would not 40

°°°°

C. 

To 

prevent any damage to the battery. 

h) Do not store or carry a battery in a pocket, toolbox or any other place where it may come 
into contact with metal objects. 

The battery pack terminals may be short-circuited causing 

damage to the battery or burns or a fire. 

i) If the battery is damaged and leaks, avoid contact with skin and eyes. 

If contact happens, 

immediately seek medical advice.

 

 

(D) Special warnings when using the product 
 

1. Become familiar with the controls and the proper use of the tool. 
2. Keep children and bystanders away

 

Do not let bystanders touch the tool or its power cable or the extension cord.  
All bystanders (esp. children) should be kept away from tool and work area. 
Keep the product away from children or from their environment. Never allow children to operate the 
tool. Children should be supervised to ensure that they do not play with the tool. 
3. The use of this product is forbidden to children. 
4.  Only  well-instructed  adults  should  operate  the  product.  This  product  is not  intended  for  use  by 
persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, 

Summary of Contents for D18-08






























Reviews: