When using the blower vacuum to pick up leaves it is best to move the machine on the rollers. This
ensures that the blower vacuum is at the perfect height above the ground. The blower vacuum is
designed only to pick up leaves. To avoid machine damage, do not use it to pick up branches, stones or
other hard materials.
When using the machine as a leaf blower always work away from solid objects such as walls, fences, etc.
Whilst you work do not place the blower vacuum tube too close to the leaves.
The machine will be more effective if you keep it at a certain distance away from the leaves and blow
the leaves forwards
5.2.3- Switching operating mode
To switch the machine from blower mode to vacuum mode, simply
switch it off at the main switch and move the selector lever to the
required position.
1. Blow
2. Vacuum
5.2.4- Leaf bag
Note: Before you remove and empty the leaf bag ensure that the
machine has been disconnected from the mains power supply.
To empty the leaf bag simply open the zip fastener, empty the bag and
then close the zip fastener again.
When the leaf bag is open you can also check the function of the blower
vacuum's slide control. If there is a blockage in the machine, check this
function and remove the blockage.
5.2.5- Extension cord
Tip:
The extension cord may come undone from the power cord during use.
To avoid this, use the cable restraint
VI. MAINTENANCE AND STORAGE
Before any intervention on product, ensure that product is disconnected from its
power source.
6.1- After using the machine
1) Empty the leaf bag.
2) Check the vacuum tube and remove leaf residue.
3) Check the blower/vacuum's slide control for leaf residue.
6.2- Cleaning
Clean plastic parts with a soft clean cloth.
Do not use aggressive cleansers (solvents or abrasive cleansers), or an abrasive sponge.
Do not put or immerse product in water or any other liquid.
Clean ventilation holes with a soft brush.
