RIB NORMAL, Manual

Page: 31 / 72

31
TECHNICAL CHARACTERISTICS
Lh./rh.irreversible gearmotor used for raising and lowering barrier poles up to 6-7 m long.
The upright can be supplied in a painted galvanized version.
The barrier boom can be supplied as one unjointed length or, where headroom is restricted, it can
be requested in an articulated version if you specify the height of the obstruction above road level.
Besides it can be supplied in one piece with hanging rack.
The barrier boom is designed to be fitted with a pneumatic or photocell safety strip.
ATTENTION: It is compulsory to conform the barrier characteristics to the current regulations and
laws.
Measurements in mm/inch
118,11”
450,78”
177,16”
63”
401,57”
2755,90”
181,10”
NORMAL barrier
- Photoelectric cells
- Galvanized column for P.E. cells
- Fotocosta
- Magnetic loop
- Key selector
- Tuned aerial
- Emergency button
TECHNICAL DATA
NORMAL
Max. boom lenght
m
6-7
Opening time s 11
Max. torque Nm 300
EEC Power supply 230V~ 50Hz
Motor capacity W 130
Power absorbed A 0,6
Capacitor µF 6,3
Power supply 120V~ 60Hz
Motor capacity W 168
Power absorbed A 1,46
Capacitor µF 20
Normative cycles 230V n° 1000 - 11s/2s
Normative cycles 120V n° ∞ - 11,5s/2s
Daily operations suggested n° 1000
Service 100%
Guaranteed consecutive cycles
n°
1000
Lubrification SHELL OMALA S2 G100
Weight of electroreducer kg 145
Noise
db
<70
Working Temperature -10 ÷ +55°C
Protection grade IP 55
G
B
SYSTEM LAY-OUT
THIS OPERATOR IS DESIGNED FOR THE VEHICLES ACCESS CONTROL AND NOT FOR
PEDESTRIANS.
Therefore, we higly recommend the use of safety devices and that of one or
more warning plates, art. ACG9642 to prevent the pedestrians interfering with
the operator.