29
FIXING THE OPERATOR TO THE PILLAR (D)
In order to carry out a proper installation of the operator, it is necessary to comply with the geometry measurement shown in the tables in Pic. 6 and 8.
FIXING THE DRIVE ARM WITH THE ANTI-THEFT LOCKING DEVICE (E)
Unlock the operator.
Caution:
start the operation with the gate in closing position. Straighten the levers until the anti-theft lock (E Pic. 5) is engaged and stressed. Move the levers back a little bit just enough to
avoid keeping the anti-theft locking in working position (stressed) every time the gate will close.
ASSEMBLING DRIVE ARM WITH THE ANTI-THEFT
LOCKING DEVICE (E)
Assemble the arms as shown in Pic. 5.
Caution:
Once the screws V and W have been thoroughly tightened (Pic.
5) unscrew them for half a turn, in order to guarantee a free movement
of the arm.
After assembling the arm, unlock the motor and fix the arm to the motor
with the supplied screw and M10 washer.
With the gate in closing position and the motor at rest, the anti-theft lock
(E) keeps the gate leaves securely closed and prevents anybody from
forcing the gate leaves open.
5
E
V
W
DRL8x17I
DRG6I
DRL10x20I
DRL8x17I
DRL8x17I
I
X
B
A
α
α
° A max A max* X
B
I
90
140 190
60
130 300
90
200 200
70
140 270
90
205 205
80
150 230
90
225 225
90
160 135
90
-
240 110 180
0
95
0
0
70
140 284
100
0
0
90
160 302
105
0
0
110 180 315
110
0
0
155 225 322
T sec
20
19
18
16
15
18
19
19
19
6
A max* - In case only one mechanical stopper is used in closing (Pic. 8)
4
X
13
98
80
80
138
D
G
B
