34
10.3
ADDITION OF OTHER RADIO CONTROLS
10.4
DELETION OF INTERNAL RECEIVER MEMORY (RESET)
10.5
TRANSMITTER TECHNICAL DATA
Up to 32 transmitters can be memory-stored in every receiver. If all the receiver’s memories are occupied, the motor moves twice in both directions.
1. Press and hold down for 5 seconds the STOP key of the transmitter (already stored in the memory); the motor moves for 1 second in both directions.
2. Press the RISE key within 5 seconds, and press the DESCENT. Key within the next 5 seconds; the motor moves in both directions for 1 second.
3. Press the RISE push-button of the NEW transmitter within 5 seconds. If the new transmitter was correctly memory-stored, the motor moves in both directions
for 1 second.
4. If the memory storage was not successfully performed, repeat the procedure.
1. Cut power to the motor.
2. Connect the black wire to the brown wire (If you have the step-by-step push-button, just hold it down without making any connection.
3. Power up the motor.
4. After 5 seconds, the motor moves in both directions for 1 second, signalling that the memory was completely deleted
5. Cut power to the motor again.
6. Disconnect the black and brown wire (Release the push-button if you have the step-by-step push-button).
Power supply
1x 3V Battery, CR2032
Current consumption
10 mA
Frequency
868,30 MHz
Modulation FSK
Operating temperature
-20°C / +55°C
Range
free-field: approx. 100 m
buildings: approx. 30 m
Dimensions
110 x 38 x 14 mm (without mounting plate)
Weight
37 g (incl. battery, without mounting plate)
G
B