GG
BB
E
XPANDER PLEX
CARTE
APPLICABLE ONLY TO CARDS KS AND KS SUPER WITH
SOFTWARE REV 07 OR LATER.
The EXPANDER PLEX card
allows the control of up to 4 photocells
couples
(one connected to KS card and three connected to the
EXPANDER PLEX card).
Control includes a Self Test of the 4 photocells couples and of the
fence, performed on completion of every opening stroke of the gate.
After every opening the gate closure is therefore allowed only upon
successful completion of the 4 photocells couples Self Test.
MAIN FUNCTIONS
MONITORING OF 4 PHOTOCELLS COUPLES
PEDESTRIAN OPENING
AUTOMATIC PEDESTRIAN CLOSING
MANAGEMENT OF THE SAFETY EDGE
MANAGEMENT OF THE COURTESY LIGHT
MANAGEMENT OF THE TRAFFIC LIGHT CONTR
STRIP CONTROL
code ACG5472
33
33
33
33
S
PARK
In order to make the systems mentioned above give the best
performances, you need to install an antenna tuned on the frequency of
the radio receiver installed.
N.B. Pay attention to not let the central wire of the cable to came
Into contact with the external copper sheath, since this would
prevent the antenna from working.
Install the antenna vertically and in such a way the remote control can
reach it.
SPARK ANTENNA 91
code ACG5454
SPARK ANTENNA 433
code ACG5252
SPARK BLINKER WITH IN-BUILT INTERMITTENT CARD
code ACG7059
F
IT SYNCRO
FIT SYNCRO PHOTOCELLS
for the wall-installation code ACG8026
The range you can set is 10-20m, 30÷60ft.
You can fit many couples close together thanks to the synchronising
circuit.
Add the
SYNCRO TRANSMITTER
code ACG8028
for more than 2 photocells couples (up to 4).
COUPLE OF BUILT-IN BOXES FOR THE FIT SYNCRO
code ACG8051
B
LOCK
BLOCK KEY SELECTOR FOR WALL-INSTALLATION
code ACG1053
BLOCK KEY SELECTOR TO BUILD-IN
code ACG1048
C
ODE LEARNIG SYSTEM RADIORECEIVERS
RX91/A
quarzata and coupling
code ACG5005
RX91/A
quarzata and terminal board
code ACG5004
RX433/A
super eterodyne and coupling
code ACG5055
RX433/A
super eterodyne and terminal board
code ACG5056
RX433/A 2CH super eterodyne, 2 channel and coupling code ACG5051
RX433/A 2CH super eterodyne, 2 channel and terminal board
code ACG5052
ACG6081 - MOON 433
ACG7025 - MOON 91
ACG6082 - MOON 433
ACG7026 - MOON 91
R
ADIO TRANSMITTER MOON
Summary of Contents for AA30031
