Section 10
10
39
Research Instruments Ltd
SECTION 10 - CARE AND MAINTENANCE
Cleaning
We recommend that a non PVC dust cover is placed over the microscope when not in use. Plasticisers
commonly used in PVC are toxic to embryos.
The control unit case should be cleaned with a cloth moistened with isopropyl alcohol or mild detergent
solution only. If any liquids are spilt over the control unit switch off immediately and remove the power
connector. Clean the spill and ensure that the unit is completely dry before switching on. If it is suspected
that any liquids have gone inside the case contact RI for advice before switching on.
Routine maintenance simply involves ensuring that all optical components are kept clean. The lens on
the end of the Saturn 5 Laser System objective should be cleaned occasionally by wiping gently with a
dry lens cloth.
Every six months the collimator module should be removed and the dichroic mirror cleaned with a dry
lens cloth. This should be done by RI or an appointed representative as the laser alignment must be
checked and readjusted after removing the collimator module.
For further advice on microscope cleaning, please contact RI or your microscope supplier.
Servicing
Regular servicing by an RI authorised technician will help to ensure that your system performs at its
best. We recommend a minimum of one annual inspection and service. However, this may need to
be more frequent if systems are heavily used. Contact your distributor or RI’s service team directly
to arrange servicing. Where necessary, RI will provide all technical information required to assist in
resolving problems.
For all maintenance requirements, contact your distributor or RI’s service team directly.
In the event that you have a problem with RI instruments, first look at the Troubleshooting section. If
you require any further help, contact your distributor or RI’s service team direct. We will try to resolve
the problem as quickly as possible.
No user serviceable parts.
Disposal of Goods
If any electronic component is no longer serviceable, it must be sent back to RI to be destroyed
in an environmentally safe way. Do not dispose of with ‘normal’ waste.
We recommend that the system undergoes a routine service at least every twelve months.
This can normally be carried out by your distributor.
