background image

GENERAL EXPLANATION

Handle

Seat

Adjustable 
Legs

Back

 

 

 D

 

SET UP

Prior to use, please read all instructions.

We recommend you keep this user guide for future 

LIFETIME LIMITED WARRANTY

Your Rhythm Healthcare product is warranted to be free of defects in materials and 

workmanship for the lifetime of the original consumer purchaser. This device was built to 

exacting standards and carefully inspected prior to shipment.

This Lifetime Limited Warranty is an expression of our confidence in the materials and 

workmanship of our products and our assurance to the consumer of years of dependable 

service.

In the event of a defect covered by this warranty, we will, at our option, repair or replace 

the device.

This warranty does no cover device failure due to owner misuse or negligence, or normal 

wear and tear.

The warranty does not extend to non-durable components, such as rubber accessories, 

casters, and grips, which are subject to normal wear and need periodic replacement.

Should you have any questions regarding your 

Rhythm Healthcare

 product or warranty 

please call your local dealer or contact us directly.

CLEANING

Do not use high pressure cleaners, steam cleaners or harsh, caustic chemicals for cleaning.

> Use a non-abrasive detergent or household cleaner with warm water.
> Rinse with warm water and wipe dry.
> DO NOT USE AN ABRASIVE CLEANER OR CLOTH with this product, as damage
may ensue.

Place the bench with the seat facing down on a level 

surface. Insert the two legs with large suction tips into the 

end of the frame that has the seat handle slots. Depress 

the chrome button at the top of the leg and push the leg 

into the frame. Ensure that the chrome button clicks and 

locks into position. Following the same procedure, insert 

the two legs with small suction tips at the other end of the 

bench [A].

Insert the backrest extensions into the backrest tubes. 

Depress the chrome button on the backrest tube and 

ensure that the chrome button clicks and locks into 

position [B].

Turn the bench on its side and insert the backrest 

extensions into the four tubing slots under the seat. 

Depress the chrome button on the backrest extensions 

and ensure that the chrome buttons click and lock into 

position from the top tubing slots. The backrest can slide 

on either side of the bench depending on the direction 

the you will be sitting [C].

Place the bench upright so that it is resting evenly on all 

four legs and insert the seat handle into the seat handle 

slots. Depress both chrome buttons on each side of the 

handle and push down until the chrome buttons click and 

lock into position [D].

To adjust the legs and seat height, depress the chrome 

button on the legs and slide each leg to a desired height. 

Be sure all four legs are level, stable, and all push buttons 

are fully locked into position before using. The two legs 

with large suction tips should be used inside of the shower.

A

B

C

1

1

1

2

1

3

1

4

1

5

 

D

2

3

Reviews: