Headlight & Taillight Preparation
Headlight Preparation
1. Cut out the headlight template following the guidelines.
2. Place the template on the driver side front
cowl and align it with the cowl mold lines
and emblem. Secure with painter’s tape.
3. Trace the inside contour of the template
using a marking device.
NOTE
: To prevent chipped paint on a
painted cowl, tape over the drawn line.
Redraw over the tape using the template.
4. Using a jig saw or rotary tool, cut out the
INSIDE of the marked area. Test fit the
headlight and make any adjustments
before removing the tape. Once the light
fits, remove the tape and sand any rough
edges.
5. Flip the template over and repeat Steps
2-4 for the passenger’s side.
Taillight Preparation
1. Cut out the included taillight template
following the guidelines.
2. Use painter’s tape to tape the template to
the driver side rear body of the cart. Align
the template with the body lines and edge
of bagwell as indicated on the template.
3. Use a marking device to trace the inside
contour of the template onto the body.
NOTE
: To prevent the paint from chipping,
lay painter’s tape down first and trace over
the tape.
4. Use a jigsaw or rotary tool to cut out the
INSIDE of the marked area. Test fit the
taillight. If needed, make any modifications
and retest. Once it is fitted properly, remove
the tape and sand any rough edges.
5. Flip the template over and complete Steps
2-4 for the passenger taillight.
Page 4
