Page 2
Hardware Kit
*
The hardware kit is for universal fitment. A different length carriage bolt may be
required depending on thickness of mounting surface.
Tools Needed for Installation
- Socket & Ratcheting Wrench (10mm)
- Drill & Drill Bit (1/4”)
- Wire Cutters, Strippers and Crimpers
- Marking Device
Specifications
LED Color:
Amber (LGT-297); Red / Blue (LGT-298)
Voltage:
10-30V DC
Max Power:
36W
Flash Pattern:
10
Size:
356mm x 210mm x 44.9mm (excluding mounting brackets)
Cleaning Instructions
Use only soap and water to clean the outer lens. Use of other chemicals could result
in premature lens cracking (crazing) or discoloration. Lenses in this condition have
significantly less effectiveness and should be replaced. Do not pressure wash.
Before You Start
1. Turn Key OFF.
2. Place Tow/Run Switch in Tow if equipped.
3. Remove the system’s positive and negative connections from the battery or
battery pack.
4. Engage the parking brake.
Contents of LGT-297/298 Hardware Kit
Qty.
a
6mm-1.0 Carriage Bolts
*
4
b
6mm Spacer
4
c
6mm Flat Washer
4
d
6mm Lock Washer
4
e
6mm-1.0 Hex Nut
4
