Page 21 of 44 pages
DVD7400BT ENGLISH
Intro
To briefly scan the tracks on an audio CD, press the (INT /PTY) button on the Remote
Control during the playback until “INT“ appears on the display. Then all tracks will be
scanned for approx. ten seconds. The message “INT” will appear. To end the function, press
the (INT/PTY) button again until the “INT“ message is turned off on the display. The playback
continues at the point where the last intro was interrupted.
Playing tracks in random sequence (Random)
For random playback, press the (RDM/BAND) button on the Remote Control during the
playback, the message “RANDOM” will appear. The device begins to play a randomly
selected track. If the RDM button is pressed during the playback of a track, this track will be
played again from the beginning. All other tracks will also be played back in random
sequence. To end the random function, press the (RDM/BAND) button again until the
abbreviation “RANDOM“ is turned off. The tracks will now be played back in their regular
sequence.
Note:
If the first track of a multi-session CD contains audio data, only the audio
data are played back, even if other data formats are recorded.
Inserting / removing SD/MMC
To insert an SD/MMC card, please press the EJECT button on the device. (
Note
, before the
screen appears it can take a few seconds)
The selection menu will be shown. Select SD card and the Front Panel will lower.
Now you can insert a data carrier into the SD/MMC card slot. Please insert your SD/MMC
card into the card slot with the contacts downwards and until it audibly snaps into position.
The monitor will close automatically after a few seconds and playback will start after the card
is recognized. SD/MMC cards with a storage capacity of up to 2 GB are supported. SDHC
memory cards are not supported. To remove an SD/MMC card, again press the card to be
removed lightly into the device until it snaps out. Afterwards you can remove the card from
the slot. After removing the card, the device automatically switches to CD/DVD as a playback
source. If a data carrier has been inserted, it will be played back. If no data carrier is inserted,
the device will remain in the STOP mode of the CD/DVD playback. Never use force when
inserting and removing an SD/MMC card; this could damage the device as well as the card.
Also avoid direct skin contact with the contacts on the card to prevent contact problems.
