Page 8 of 44 pages
DVD7400BT ENGLISH
Installing the unit
Note
:
Please observe the following safety instructions for the connection of the unit:
-
Read the entire installation section before connecting the unit.
-
Disconnect the negative pole of the vehicle battery for the duration of the installation.
-
Observe the safety instructions by the vehicle manufacturer during this task.
-
If you need to drill holes for the installation, make sure that no parts of the vehicle are
damaged.
-
The cross section of the positive and negative cable may not be less than 2.5 mm².
-
Do
not
connect any of the vehicle’s plugs and cables to the radio unless you have the
appropriate specialized knowledge of this process!
-
Only use the supplied cable to connect the device.
- Depending on the build of your vehicle, the installation may deviate from this
description.
- We do not assume any liability for damages caused by faulty installations or
connections, nor any subsequent damages.
- We recommend that you have the device installed by a specialized company. Then
you will have created the prerequisites for a problem-free functioning of the device. If
at any point during the installation you are unsure that you can correctly connect the
device by yourself, contact a specialist. A faulty installation may cause damages to
the device and the vehicle electronics.
4
