Installation Manual of Network Mini Dome Camera
3
2.1.1 Camera Physical Description
Serial NO.
Description
1
Back box
2
Lens
3
P: Power LED indicator, which turns red when power is applied to the unit.
4
Bottom board
5
Bottom board set screw hole
6
Lens set screw
7
S & L: Network status LED indicator.
When the network is connected, the “S” LED turns orange, while the “L” LED
flickers in green.
8
RESET: Reset all paramaters to factory default settings.
NOTE:
When the camera is power up, press the “RESET” button for a
bout 10 seconds, then all
parameters, including user name, password, IP address, port number, etc., will be reset to the
factory default settings
.
