Installation Manual of Network Mini Dome Camera
5
2.2 Hardware Installation
The ceiling mount is a suitable installation method for this camera. Please stick to the
following steps:
1.
Loosen the set screws with a hexagonal screw driver (attached with the camera),
and take down the back box shown as below:
Fig. 2.2.1 Remove the back box
2.
Use the screws to fix the bottom board on the ceiling.
Fig. 2.2.2 Fix the bottom board
3.
While v iewing the video on the computer , adj ust the camera’s view angle fo r
NOTE:
If required, user can apply the
pliers to remove the clip (refer to
the part marked in dotted line) on
the side of the back box and then
feed cables through the opening to
secure on the ceiling.
