12-9-2004
2 of 4
F-3827
2-7282
PARTS LIST - BACKHOE SUBFRAME
Item
Part No.
Description
Qty.
1
51308
SUBFRAME
1
2
51312
BRACKET, Mounting, Rear
1
3
44892
PIN, Hitch
2
4
44756-1
PIN, Linch
2
5
42672-24
SCREW, Cap, 12mm-1.25mm x 35mm
6
6
42672-60
SCREW, Cap, 14mm-1.50mm x 45mm
6
7
41838-8
SCREW, Cap, 3/4-10 x 2
6
8
51318
BRACKET, Mounting, Front
1
9
41837-5
WASHER, Lock, 1/2
6
10
41837-6
WASHER, Lock, 9/16
6
11
41840-8
NUT, Lock, 3/4-10
7
12
41838-71
SCREW, Cap, 3/4-10 x 4", Grade 5
1
13
31897
SPACER, (Used when mounting tank.)
2
Backhoe
Mainframe
Backhoe
Subframe
Subframe
Crosstube
Rotate subframe up
until engaged with
front mounting bracket.
Front
Mounting
Bracket
Rear Mounting
Bracket
MOUNTING BACKHOE TO TRACTOR
(Figures 1 & 2)
1. Start engine and run at slow idle speed. Using
backhoe controls, lower bucket and stabilizers to
provide a base for raising subframe. Using backhoe
controls, raise subframe to proper height to connect
to tractor.
2. Position 3-point hitch arms inside subframe.
3. Slowly back tractor so cross tube engages pocket in
rear mounting bracket (2).
4. Retract boom cylinder and stabilizer cylinder so front
of subframe (1) rotates up until front mounting tube is
seated in front mounting bracket (8).
5. Secure front mounting tube in place using clevis pins
(3) and linch pins (4).
NOTE:
After backhoe is mounted, swing backhoe
full right and full left to be sure there is not
interference between swing cylinders and 3-point
hitch arms.
Figure 1
Mounting Subframe
to Tractor
