RHINO FM84A, Operator'S Manual, Page: 91 / 128

OPERATION
OPERA
TION
Operation Section 4-17
© 2004 Alamo Group Inc.
FM84A 09/03
¾
Inspect the oil level in all gearboxes . A low oil
level is a warning sign that the gearbox may be
cracked or its seal is damaged and needs to be
replaced.
¾
Ensure all gearbox vents are in place and free from
clogs.
¾
Ensure the Axle Arm Weldment bolts are properly
installed and tightened.
¾
Ensure the snapper pin is installed correctly on
the fork and wheel assembly
¾
Inspect all bolts and screws and tighten to the
recommended torque.
DANGER!
All Safety Shields, Guards and Safety devices including (but not limited to) - the
Deflectors, Chain Guards, Steel Guards, Gearbox Shields, PTO integral shields, and
the Retractable Door Shields should be used and maintained in good working
condition. All safety devices should be inspected carefully at least daily for missing or
broken components. Missing, broken, or worn items must be replaced at once to
reduce the possibility of injury or death from thrown objects, entanglement, or blade
contact.
(SGM-3)
¾
Inspect the condition of the drive belts.
¾
Ensure the slip clutch is properly adjusted and the
friction plates are not frozen together. Reference
the Maintenance Section for proper slip clutch
maintenance.
¾
Ensure the slip clutch shield and drive belt shields
are in place and in good repair.
¾
Ensure the tractor PTO master shield is in place,
lowered and in good condition.
Axle Arm Bolt
Retaining Pin