RHINO FM84A, Operator'S Manual, Page: 89 / 128

OPERATION
OPERA
TION
Operation Section 4-15
© 2004 Alamo Group Inc.
FM84A 09/03
8. PRE-OPERATION INSPECTION AND SERVICE
Before each use, a pre-operation inspection and service of the mower and tractor must be performed. This
includes routine maintenance and scheduled lubrication, inspecting that all safety devices are equipped and
functional, and performing needed repairs. Do not operate the mower and tractor if the pre-operation inspection
reveals any condition affecting safe operation. Perform repairs and replacement of damaged and missing parts as
soon as noticed.
By performing a thorough pre-operation inspection and service, valuable down time and repair
cost can be avoided.
DANGER!
Always disconnect the main PTO Driveline from the Tractor before performing service
on the Mower. Never work on the Mower with the Tractor PTO driveline connected
and running. Blades or Drivelines could turn without warning and cause immediate
entanglement, injury or death.
(SRM-3)
Never work under the Mower, the framework, or any lifted component
unless the Mower is securely supported or blocked up to prevent
sudden or inadvertent falling which could cause serious injury or
even death
.
(SG-14)
WARNING!
WARNING!
Periodically inspect all moving parts for wear and replace when neces-
sary with authorized service parts. Look for loose fasteners, worn or
broken parts, and leaking or loose fittings. Make sure all pins have cotter
pins and washers. Serious injury may occur from not maintaining this
Implement in good working order.
(SG-21)