RHINO CY84, Operator'S Manual

Page: 94 / 146

OPERATION
CY84 03/08 Operation Section 4-6
© 2008 Alamo Group Inc.
OPERA
T
ION
3.3 Tractor Horsepower
The power required to operate a mower is determined by the tractor PTO horsepower. For most mowing
conditions, the CY84 mower requires a tractor with at least 60 HP for a lift unit and 30 HP for a pull-type.
Operating the mower with a tractor that does not have adequate power may damage the tractor engine.
Exceeding 90 HP may cause mower damage by overpowering the unit in heavy cutting conditions.
3.4 3-Point Hitch
The tractor 3-point hitch must be rated to lift at least
1600 lbs.
The CY84 mower is designed to be mounted on a
tractor with a CAT II or III 3-point hitch. Refer to the
tractor operator’s manual for the category of the
tractor being used. If the hitch does not conform to
ASAE CAT II or III dimensions, the mower may not
fit or raise properly. Consult an authorized dealer
for possible modification procedures to mount
nonconforming hitches.
Depending on the hitch category, certain size pins
are used to attach the mower to the tractor. CAT II
hitches require 7/8” lower and 3/4” upper diameter
hitch pins. CAT III hitches require 1-7/16” lower and
1-1/4” upper diameter size pins.
CAT II Implement / Hitch SpecificationCAT III
Implement/ Hitch Specification
Width from outside to outside A-frame...........32-3/8” Width from outside to outside A-frame ................38”
Quick Hitch width inside lug to lug ................33-5/8” Quick Hitch width inside lug to lug .................39-1/4”
Height from bottom hitch pin to top pin ................19” Height from bottom hitch pin to top pin ................22”
Lower pin diameter ........................................1-1/18” Lower pin diameter ........................................1-7/16”
Upper pin diameter ...............................................1” Upper pin diameter ..........................................1-1/4”
Lynch pin diameter .........................................15/32” Lynch pin diameter .........................................15/32”