3
Installation
The Auta-lite is installed easily using the existing wires from your old light switch.
THIS MUST BE CARRIED OUT BY A LICENCED ELECTRICIAN.
Standard Load Wiring Diagram
Fluorescent Lamp Wiring Diagram
On certain fluorescent light installations a
power factor correction capacitor may need
to be installed. If so refer to the diagram
above.
IMPORTANT NOTE:
NEVER MOUNT LIGHT BLUBS WITH THE FILAMENT FACE UP
(see picture
right). The filament will fall and short across the bulb terminals if
and when the light globe blows. This will in-turn cause a component
(the triac) on the ENSA to heat up and destroy itself.
This is not
covered under warranty.
