6
26
32
31
32
32
35
37
35
37
37
26
34
25
25
33
34
34
25
33
18
20
26
A2
A2
18
20
18
20
38
38
37
STEP:7
•
Attach the Electronic Scorer Base (#31) to the Electronic Scorer Top (#32) using six Screws (#26) at each side. See Figure 7A.
•
Attach both Pole Bases - Inside (#34) to the side rails of the table using two Screws (#25) per Pole Base.See Figure 7B.
•
Attach the Scorer Pole (#37) to the side rails of the Scorer Pole (#37) using two washers (#20) and two Bolts (#18) per Pole Base.
NOTE:
Twist the Plastic Nut (#35) onto the Scorer Pole (#37).
•
Insert the plug from the Electronic Scorer (#31/32) into the plug from the Scorer Pole (#37). See Figure 7C and Figure 7D.
•
Thread the scorer wire from the Scorer Pole (#37) through the opening of the side rail.
•
At this side of the table, attach one Pole Base - Outside (#33) to the Pole Base - Inside (#34) using four Screws (#26). Repeat the same for the
other side of the table using the other Scorer Pole (#37).
•
Repeat the same at the other end of the Electronic Scorer.
FIGURE 7C
FIGURE 7D
FIGURE 7A
FIGURE 7B