C
J
I
Front ONLY
Using the M8 x 20 T Bolts, fl at washers and
nyloc nuts, secure the Front
[I]
and Side
[J]
End
Caps to each Ladder Rail
[C]
as shown.
Securely tighten T-Bolts with a 13mm Socket.
4
5
Slide an M6 T Bolt into slots on the base section
of the rail as shown. Slide an M8 Steel T Bolt
into the underside of each rail.
Place the left and right Bullnose over the T Bolts
on top of the rail. Ensure the Bullnose is
fully
located up against
the end of the ladder rail.
Fix in place with M6 washers and nyloc nuts.
Tighten with a 10mm socket.
6
Using the M8 x 20 T Bolts, fl at washers and
nyloc nuts, fi x the Side End Caps to each Ladder
Rail as shown.
Securely tighten T-Bolts with a 13mm Socket.
7
Attach the MSB620 Bullnose Crossbar to the 2
M8 x 20 Steel T Bolts, installed in step 5.
Secure the crossbar with M8 washers and nyloc
nuts. Tighten with a 13mm socket wrench.
Page 4 of 6
MS15-680 Short Multi Slide Step Ladder System
