5
Attach the MSB470 Bullnose Crossbar to the 2
M8 x 20 Steel T Bolts, installed in step 3.
Secure the crossbar with M8 washers and nyloc
nuts. Tighten with a 13mm socket wrench.
6
Note: RLTAB-8 (HD) or RLTABM6-8 (VA) required
(sold as separate)
Position the MS15-470 Multi Slide Ladder Rack onto the vehicle’s
crossbars in the desired position. Be sure to allow clearance for the rear
door of the vehicle.
Slide 4 channel nuts into the crossbars at the front and rear of the ladder
rack. The assemblies provided in the chosen RLTAB kit will fi x to these.
The Tabs will lock onto the outer and inner edge of each ladder rail.
When in position, tighten in place with a socket wrench.
RLTAB-8 Shown (HD).
7
Side View:
RLTAB-8
Ladder Rail
Adjust the positioning of the ladder slides as
required. Tighten in place with a 10mm socket
wrench.
Check all fi xtures are secure before use.
Page 4 of 5
MS15-470 Short Multi Slide Extension Ladder System
