7
Fit Ratchet Strap:
Horizontal Holder:
Lay the ratchet strap over the middle of the
jerry can holder as shown. Wrap the ratchet
end of the strap under the crossbar and feed
through the loop, gently pull the ratchet until
the strap is firmly in place. Repeat this for the
opposite side, ensure that the strap is kept as
close to the jerry can holder as possible.
Tighten the ratchet strap until the jerry can is
secure.
Vertical Holder:
Insert the ratchet strap through the handle of
the jerry can as shown. Wrap the ratchet end of
the strap under the crossbar and feed through
the loop, gently pull the ratchet until the strap is
firmly in place. Repeat this for the opposite side,
ensure that the strap is kept as close to the jerry
can holder as possible.
Tighten the ratchet strap until the jerry can is
secure.
Page 5 of 5
43107
Rhino Jerry Can Holder
43108
Rhino Jerry Can Holder - Horizontal
