Page 4 of 12
33100 LH, 33200 RH - Batwing
Slide the bracket assemblies into either of the slots of the
Batwing awning. Finger tighten only.
Heavy duty crossbar
*Requires purchase of
33101 hardware kit.
Vortex crossbar
Pioneer
Up to
1000mm
Up to
1000mm
Be sure
hardware is
located
correctly
within the
crossbar.
Tighten to 4-5Nm with a 13mm socket wrench. Be aware
of tail gate position and adjust awning position
accordingly.
Install the pick up mounting points at the rear of the vehicle, on the opposite side you intend to fi x the Batwing
awning to. Tighten in place with allen key provided.
2
3
4
5
Be aware of height
diff erences when
changing bracket
orientation. Confi rm
door clearance.
42mm
95mm
Min
700mm
