Page 10 of 12
33100 LH, 33200 RH - Batwing
21
Replace the metal pegs and guy ropes to their original
position. Zip the outer bag closed.
1.
22
2.
3.
Important Notes
The support arms are designed to allow slight adjustment by the end user. When housed, if the arms are not
sitting fl ush with end cap (fi g A), adjust the rotation on the arm using a phillips head screw driver (fi g B).
(fi g A) If the arm is off
centre as shown, the
magnet in the end cap
will not secure the arm
in place properly.
(fi g B) Loosen the screw behind the
drop down hinge, adjust the arm
rotation and re-tighten the screw.
1
