7) Operating the APES-14.
1. Control Center and Power Overview;
APES-14 Paper Exit INACTIVE – Switching to this position puts the
APES-14 in idle status. Your HD punch will still operate normally but
the APES-14 will not eject and stack.
- Normal setting for this switch is down.
APES-14 Paper Exit ACTIVE – Puts the APES-14 in the active
status. Your HD punch and APES-14 will work together punching,
ejecting, and stacking.
Paper Stop ACTIVE – When selected, the Paper Stop overrides the
foot pedal. By pushing the paper against this switch, it positions the
paper in the correct location so the holes are centered in the sheet
and also activates the punch. (See assembly instructions within the
Paper Stop package)
- Normal setting for this switch is down.
Foot Pedal ACTIVE – When selected, it allows for normal punch
activation with the foot pedal. Both the foot pedal and Paper Stop
Switch can be installed, this allows switching between them. Only
one is active at a time.
Portrait – Changes APES-14 machine timing to better accommodate
stacking portrait paper.
- Normal setting for this switch is down.
Landscape – Changes APES-14 machine timing to better
accommodate stacking landscape paper.
APES-14 POWER ON I/0 – Turns the APES-14 off. It is
recommended you turn the APES-14 off when you’re done for the
day. The HD punch has its own independent power switch that
should be powered off also.
Page 11
Issue “A1” 09/03 PDI Part # 900600 www.RHIN-O-TUFF.com
