INSTRUCTION MANUAL FOR DISHWASHERS
Turning the dishwasher off
x
Press
ON/OFF (1)
, on the
DISPLAY (4)
the central segments will light up, indicating that the
machine is powered.
Displaying information
x
By holding the
PROGRAMME SELECTION
button (
2
) pressed for a few seconds you can display in
sequence the Boiler temperature, the Tub temperature and the number of cycles performed by the
machine.
This information can be displayed both before and during the wash cycle and will only be visible
temporarily.
List of viewable messages
Door open
Number of cycles carried
out
Rinse temperature
End of cycle
Wash temperature
Automatic start enabled
End of shift
x
At the end of the day always
drain the machine as described in the section Machine draining.
x
Disconnect the power supply by means of the main switch and close the external water
tap
.
x
Perform
daily
maintenance and clean the machine as described in the section Maintenance.
x
IMPORTANT
Cleaning the arms
The wash and rinse arms are easily removed in order to clean their nozzles and prevent
blockage/encrustations.
Proceed as follows
:
x
Remove the
wash
arms by unscrewing the retaining
nuts or by unclipping the quick-fit attachments
on machines
if
equipped.
x
Wash all parts under a jet of running water and clean the nozzles thoroughly, using a toothpick or
pointed tool if necessary.
x
Clean the arm rotation pins inside the machine and the wash and rinse water drainage area.
x
Restore the arms and check that they rotate freely.
NEVER OPERATE THE DISHWASHER WITHOUT THE SCRAP SCREENS/FILTERS
CORRECTLY IN PLACE!
6
If possible, leave the door ajar
or hood up
to prevent bad odours building up inside the
machine.
