INSTRUCTION MANUAL FOR DISHWASHERS
1
3
1
2
USING THE MACHINE
Key and symbols
1 ON/OFF BUTTON
4 INFORMATION DISPLAY
2 PROGRAMME SELECTION BUTTON
5 TIME BAR
3 START BUTTON
Switching the dishwasher on
x
Turn on the main electrical switch and open the
external water tap.
x
Check that there is enough detergent and rinse
aid in the tanks.
x
Check the presence of the overflow (when
included).
x
Press the
ON/OFF
key
(1)
as shown alongside.
x
The machine will automatically start filling. The
START
button
(3)
flashes. When the machine is
ready, the button turns green and the time bar
illuminates completely
.
Filling the rack
T
o ensure the correct operation of
the dishwasher follow the rules described below:
x
Use a suitable rack, fill without overloading and without overlapping the dishes.
x
Always
scrape
the dishes before placing in the dishwasher; do not put dishes with dry or solid
residues in the washer
without pre-soaking first
.
x
Place the empty dishes in the rack facing downwards.
x
Place plates and the like in the sloping rack, with the inner surface facing upwards.
x
Place the cutlery in the cutlery basket, handle end down.
x
Do not place silver and stainless steel cutlery in the same cutlery basket as this will turn the silver
brown and may corrode the steel.
x
Wash the dishes immediately after use, in order to prevent any residue from hardening and sticking
on them.
x
Use only solid, dishwasher-proof dishes.
Cycle selection and start-up
x
Based on the type of dishes and their
conditions, three types of cycles are available.
(4)
.
x
Select the wash cycle that is suited for the
dishes to be washed. Repeatedly press the
key
PROGRAMME SELECTION
key
(2)
to
show the selected cycle on the display.
x
To start the programme, press the
START
button
(3)
as shown alongside.
x
During the cycle, the key turns blue
(5)
and the
time bar shows the progress of the
cycle.
1
2
3
2
3
4
5
4
5
4
5
4
5
4
