Rheonics | Switzerland | U.S.A.
SRV, SRD, SRV-FPC, SRD-FPC Installation and Intrinsic Safety Manual
P. 12
Version 2.0, Updated: October 29, 2020
Rheonics GmbH, Klosterstrasse 19, 8406 Winterthur, Switzerland
©Rheonics. Rheonics confidential and proprietary information.
1
Slots in protective sleeve exclude any fluid-borne particles larger than 8 mm diameter
2
Protective shield
3
Impact shield
Figure 4: SRV sensor with protective sleeve and impact shield mounted
1
Impact shield
2
Impact shield must be installed so that slot in shield is facing down
Figure 5: End view of SRV showing orientation of slot in impact shield
ATTENTION: These parameters and conditions must be adhered to.
If not, injury may be caused to person or property.
