PNET Operators Manual
PNET -OP-2022
Chapter 5
Getting started
9
5.3
Configure Rheonics SME
Open RCP software on the connected PC, connect to the SME using USB and configure the SME
to use DHCP. Make sure it has a valid IP address. Figure 5 shows a standard configuration that can
be used for the correct performance of the system.
Figure 5.
Configuration in RCP to use Profinet with DHCP.
5.3.1
Go to the “Comm Configure tab” in the RCP; In the Ethernet section input
all the parameters.
5.3.2
Click on the “Update SMET” button to upload the new settings into the SME
5.3.3
For
Static IP address go to the “Comm Configure” tab in the RCP; in the
Ethernet section click the dropdown menu in DHCP and select false (This
will disable DHCP function)
–
input the static IP address, subnet and
gateway to use. Check RCP manual for detailed instructions.
