Rheem TRITON, Service And Training Manual

Page: 52 / 61

Triton Service Manual SVC1020T ; Rev 4
80 and 100 gallon chassis
Triton Disassembly and Repair
52
Replacing a Burner
The only tools necessary for this will be a ratchet with a ½ in.
socket and a #2 Phillips head screwdriver. Please consult the Use
and Care manual before performing any changes and be sure to
follow any safety messages in the manuals and on the appliance.
Always ensure the customer has read and obey all safety
messages.
1. Remove the hose from the gas valve and from the bottom of
the blower.
2. Disconnect the leads to the igniter and to the flame rod sensor,
as well as the ground.
3. Undo the two harnesses from the blower
4. Disconnect the two leads connected to the low gas pressure
switch and remove the cable harness from the top of the gas
valve using the Phillips head screwdriver.
5. Using the ratchet, remove the 5 bolts attaching the burner
assembly to the top of the water heater.
6. Once the bolds are removed, remove the entire burner
assembly.
7. You will now have to remove the blower from the burner by
using the Phillips head screwdriver to remove the four screws
8. Remove the old burner and the gasket