17
Heat Pump
This mode will heat with Heat Pump
operation and will not use electric heat
during typical heating and demand cycles.
This mode has a low recovery, but minimizes
power consumption.
Energy Saver - Factory set mode for
shipping.
This mode optimizes Heat Pump and electric
heat that results in low power consumption
and High recovery.
High Demand
This mode provides the highest recovery
while still providing good energy savings.
Water heater operates Heat Pump and electric
heat simultaneously.
Electric
This Mode will heat with the electric
resistance elements. This mode should only
be used during filter and condensate drain
maintenance periods. This mode will result
in maximum power consumption.
(See "Elec. Heat Override Time" in Settings).
Vacation
This mode will allow duration setting
between 1 and 28 days or set indefinitely
with the "Hold" setting. Tank temperature
will be maintained at about 65º F.
Basic Water Heater Operation
Status
Settings
warm
hot
very hot
Service
Mode
120°
Heat Pump Mode
Status
Settings
warm
hot
very hot
Service
Mode
120°
Energy Saver Mode
Status
Settings
warm
hot
very hot
Service
Mode
120°
High Demand Mode
Status
Settings
Service
Mode
5 Days
Vacation Mode
Status
Settings
warm
hot
very hot
Service
Mode
120°
Electric Mode
Operating Mode
Press the "Mode" button repeatedly to select one of the six modes of operation (the
“Off” Mode has been discussed previously). The active mode is displayed on top of the
screen.
Energy Saver Mode
Status
Settings
warm
hot
very hot
Service
Mode
120°
