background image

AIR COOLED  

CONDENSING UNITS

92-104921-09-07 (5/16) Printed in USA

[ ] indicates metric conversions.

Do not destroy this manual. 

Please read carefully 

and keep in a safe place 

for future reference by a 

serviceman.

WARNING

THESE INSTRUCTIONS 

ARE INTENDED AS AN AID 

TO QUALIFIED, LICENSED 

SERVICE PERSONNEL FOR 

PROPER INSTALLATION, 

ADJUSTMENT, AND 

OPERATION OF THIS 

UNIT. READ THESE 

INSTRUCTIONS 

THOROUGHLY 

BEFORE ATTEMPTING 

INSTALLATION OR 

OPERATION. FAILURE 

TO FOLLOW THESE 

INSTRUCTIONS MAY 

RESULT IN IMPROPER 

INSTALLATION, 

ADJUSTMENT, SERVICE, 

OR MAINTENANCE 

POSSIBLY RESULTING IN 

FIRE, ELECTRICAL SHOCK, 

PROPERTY DAMAGE, 

PERSONAL INJURY, OR 

DEATH. 

INSTALLATION INSTRUCTIONS

(-)A13, (-)A14 & (-)A16 MODEL SERIES –
13, 14 & 16 SEER

WARNING:

 

RECOGNIZE THIS SYMBOL 

AS AN INDICATION OF  

IMPORTANT SAFETY  

INFORMATION

ST-A1226-01-00

FEATURING INDUSTRY STANDARD
R-410A REFRIGERANT

e a r t h   f r i e n d l y   r e f r i g e r a n t

e a r t h

r

y   r

d l y

d l

e n

r i e

i

  f r

h

NOTE: Actual unit appearance

may vary.

Summary of Contents for A13 Series

















































Reviews: