INSTALLATION
28
The water heater must be located to ensure that the location of the flue terminal
complies with the requirements of AS/NZS 5601.1. As a guide the following
requirements are extracted from the Gas Installations Standard. The distances
are measured along the wall behind the water heater.
•
At least 500 mm between the flue
terminal and the edge of any
opening into the building, such as
an openable door or window,
measured horizontally* and
vertically.
•
At least 500 mm between the flue
terminal and a return wall or
external corner, measured
horizontally*.
Note:
* If these horizontal distances cannot be achieved, AS/NZS 5601.1 states
an equivalent horizontal distance measured diagonally from the nearest
discharge point of the flue terminal to the opening may be deemed to comply.
Check with the local regulator.
WATER CHEMISTRY
Water chemistry which can have a detrimental effect on the water heater and its
operation and / or life expectancy. Refer to “Water Supplies” on page 18 for
information on water chemistry and its effect on the water heater.
It is recommended to install a suitable filter on the cold water supply line to the
water heater if the water supply contains or has a future risk of containing
suspended solids. The Rheem warranty will not cover resultant faults on
components including the stainless steel cylinder due to the effects of sludge
and / or sediment settling in the water heater.