5.
Set
the
assembled b
ase upside down on a flat
, non-abrasive
surface. Insert
the
curved washer (2)
and
lock washer (3) and place hex nuts (4) on threaded rod (1)
.
Ti
ghten the hex nuts (4) with
the
wrench (5), as illustrated in FIGURE 3.
6.
Set
the tabletop (A) upside down on a flat
, non-abrasive
surface.
Set
the
assembled
base
on
t
op
,
aligning
the holes on the table base
with
the fixed nuts on the tabletop. Insert the Allen bolts (6)
together with
l
ock washers (3) and
f
lat washers (7).
Tighten with the Allen wrench. See FIGURE 4.
DO NOT OVER TIGHTEN.
7.
Turn the
table
upright. Check the furniture leveling
;
if
necessary
, adjust the leveler
s
on the bottom of
the leg
s
, as
shown
in FIGURE 5.
8.
Apply glue on the felt pads (9)
and
stick them underneath the levelers. See FIGURE 5.
9.
Assembly is complete.
CARE INSTRUCTIONS
1.
Dust often using a clean, soft, dry and lint-free cloth.
2.
Blot spills immediately and wipe with a clean, damp cloth.
3.
We do not recommend the use of chemical cleansers, abrasives or furniture polish on our lacquered finish.
IMPORTANT SAFETY INSTRUCTIONS
1.
Please read all instructions carefully before assembling.
2.
For your safety, assembly by two or more adults is strongly recommended.
3.
Keep
these
instructions for future use.
4.
Use only vendor
-
supplied hardware to assemble. Using unauthorized hardware could jeopardize the structural integrity of the
item.
FIGURE 3
FIGURE 5
8
6
3
7
FIGURE 4
HESTON ROUND DINING TABLE INSTRUCTIONS
Heston - Page 2 of 2
10/1/18
