• When it is completely dry, replace it and close the lid.
PRE-MOTOR FILTER
• Lift the pre-motor filter out of the cleaner.
• Soak it in warm soapy water for a few minutes, rinse under a running tap and
then let it air dry.
• When it is completely dry, replace it in the cleaner.
• Lower the bottom of the bin into the cleaner and then push the handle forward
and down to lock the bin into the cleaner.
OUTER CLEANER
• Press the grip towards the cover and lift the cover off the cleaner.
• Lift the outlet filter out of the cleaner.
• Tap it gently over the rubbish bin to dislodge any dirt.
• If it is really dirty soak it in warm soapy water for a few minutes, rinse under a
running tap, then let it air dry.
• When it is completely dry, replace it in the cleaner.
• Fit the lugs on the cover into the cleaner, then press the grip home to lock the
cover in place.
• Replace the hose end in the inlet.
CLEANING THE CLEANER
• Switch the cleaner off and unplug it.
• Wipe external surfaces of the cleaner with a damp cloth.
• Wipe the tools and tubes with a damp cloth.
• Wipe the inside of the bin and its bottom with a damp cloth.
• Don’t put any part of the cleaner in the dishwasher.
TIMING
Clean the cleaner frequently. Basically, the better you look after it, the longer it will
last. Keep an eye on it as you use it, and examine the filters when you empty the
bin.
BLOCKAGES
• If the cleaner starts to get noisy and you start to lose suction there is probably
a blockage.
• Switch the cleaner off and unplug it.
• Spread some newspaper or an old towel on the floor to avoid making a mess.
• If you’re using one of the tools, remove and check it first.
19300AU_IB_FA_250712.indd 8
27/07/12 9:57 AM
