TUBES
• Fit the extendable tube to the nozzle for floors, carpets or hard to reach places:
a) Push the tube release towards the narrow end of the tube, and keep it pressed
b) Pull out as much of the inner tube as you need
c) If you have finished using it, push it back
d) Return the tube release to the locked position
• Fit the wide end of the extendable tube to the nozzle.
• Choose a tool, and fit it to the end of the inner tube.
SUCTION CONTROL
• The suction control is located on the hose near the nozzle.
• Move the suction control towards the nozzle for maximum suction, away from
the nozzle to reduce suction.
PLUG IN
Caution: If you’ve accidentally pressed the power on/off button, the vacuum cleaner
will come on when you plug it in.
• Plug the cable into a power socket near the area to be cleaned (switch the
power socket on, if it’s switchable).
SWITCHING ON
• Press and release the power on/off button to turn the cleaner on.
CLEANING
• Move the tool over the surface cleaning a small area at a time.
• When you move to a new area, overlap the previous area to make sure none of
the surface is missed.
SWITCHING OFF
• If you want to change tools or if you’ve finished vacuuming, press and release
the power on/off button to turn the cleaner off.
FINISHED CLEANING?
• Press and release the power on/off button to turn the cleaner off.
• Turn off the power socket (if it’s switchable) and unplug the cleaner.
• Stand clear of the cable, press and hold the cable rewind button.
• Keep clear of the cable, it rewinds quite quickly and can flick up or catch on
corners and furniture. If it catches on anything, stop pressing and it’ll stop
rewinding.
• If the power cord does not retract fully into the unit you may need to pull it out
19300AU_IB_FA_250712.indd 6
27/07/12 9:57 AM
