NOTE:
Before starting this step, securely remove all slats, support slat and short support leg from the assembled bed.
For the default setting, the slat support rail will be attached to the lower setting on the side rail. If you want to attach the slat support rail to the higher setting,
please unscrew all bolts and move the slat support rail to the top setting on side rail. Re-install the bolts and slat support rail to secure to the side rail. See
FIGURE 7.
For the default setting, the metal bracket will be attached to the lower setting at front of headboard and back of footboard. If you want to attach the metal bracket
to the higher setting, please unscrew and move the metal bracket to the top setting on headboard and footboard. Re-install the screws and metal bracket to
secure to the headboard and footboard. See FIGURE 8.
Remove the short support leg (F1) and change it to long support leg (F2). See FIGURE 9.
E
F2
FIGURE 9
18th C. Spindle Turned - Page 3 of 4
10/1/18
18TH C. SPINDLE TURNED
QUEEN
BED
ASSEMBLY INSTRUCTIONS