5.
Attach the short support leg (F1) to the slat support (E) by turning it manually. See FIGURE 3.
6.
There are pre-installed metal brackets on inside of both headboard (A) and footboard (C) for the slat support (E). Set the slat support (E) on the metal
brackets as shown in FIGURE 4. Check support rail leveling and adjust the leveler at the bottom of the support leg (F) if necessary. See FIGURE 5.
7.
Set the bed slats (D) into the cavities on the slat holder rails of the side rails (B), as shown in FIGURE 6.
E
F1
FIGURE 3
Fig. 4
Fig. 3
Fig. 5
Leveler
FIGURE 4
FIGURE 5
E
D
D
FIGURE 6
18th C. Spindle Turned -
Page 2 of 4
10/1/18
18TH C. SPINDLE TURNED
QUEEN
BED
ASSEMBLY INSTRUCTIONS