3
Threaded Rod
4
Curved Washer
5
Hex Nut
Lock Washer
Wrench
NO.
ITEM
DESCRIPTION
QTY.
2
1
8 pcs.
8 pcs.
1 pc.
PARTS INCLUDED
A
B
C
D
E
F1
F2
G
H
I
J
[1]
[2]
[1]
[7]
[1]
[1]
[1]
[4]
[4]
[4]
[4]
HEADBOARD
SIDE RAILS
FOOTBOARD
BED SLATS
SLAT SUPPORT
SHORT SUPPORT LEG
LONG SUPPORT LEG
FEET
SHORT POSTS
LONG POSTS
FINIALS
8 pcs.
8 pcs.
ASSEMBLY INSTRUCTIONS
1.
Gently lay the headboard (A) and footboard (C) on a flat and
non-abrasive surface.
2.
Attach the feet (G) to bottom of the headboard (A) and footboard (C). Refer
to FIGURE 1.
3.
Place the headboard (A) upright in the location you wish the bed to be in
when fully assembled. Secure the threaded rod (1) to the fixed nut in the
headboard by simply turning it manually. Raise the side rail (B) and place the
rod (1) to align with the bore holes on the end of the side rails (B). Put the
side rail (B) up against the headboard (A) so the threaded rods go through
the bore holes. Insert curved washer (2) and lock washer (3), place hex nuts
(4) on threaded rod (1) and tighten hex nuts (4) with wrench (5). See FIGURE
2.
4.
Repeat the above procedure with the other side rail (B) to attach it to the
headboard (A), and then repeat to connect both side rails (B) to the
footboard (C).
C
FIGURE 1
G
FIGURE 2
1
2
3
4
5
B
B
6
Allen Wrench
1 pc.
Page 1 of 4
18TH C. SPINDLE TURNED
QUEEN
BED
ASSEMBLY INSTRUCTIONS
10/1/18
HARDWARE INCLUDED