Installation Instructions:
1. Attach one of the mounting brackets, securely to the back edge of the furniture. Use the shorter screws.
2.
Determine where furniture is to be placed and mark location on the wall for the mounting bracket screw hole
approximately 2” below the bracket mounted to the edge of the furniture.
3.
Drill a 3/16”hole in the wall. Press the plastic anchor into the hole and gently tap until the flange on the
anchor is against the wall surface.
4.
Position the bracket over the anchor and use the longer screw to securely attach the bracket to the wall.
5.
Place the furniture so the bracket on the back edge is in line with the bracket on the wall.
6.
Lace an end of the nylon restraint strap down through each bracket. Bring both ends together and slide the
beaded end of the strap through the key hole shaped slot in the other end until snug. Pull down on the beaded
end until it snap locks into the keyhole slot.
7.
To double lock, return the beaded end back through the keyhole as shown.
8.
Check to make sure the strap is securely laced and locked to the brackets.
R e c l a i m e d P i n e L o w B o o k c a s e
