8.
Align the threaded rods on the footboard (A) to the corresponding holes at the end of the storage (B), lower side rail (C) and upper side rails with
guardrail (D&E1), (D&E2). Align the locator pins on the end of the storage and the side rails to the corresponding holes in the footboard. Insert the
footboard into the storage and the side rails.
9.
Repeat step 6, 7 to attach the storage and the side rails to the footboard. See SKETCH below.
10. For packing purpose, the handles were reversed. Unscrew to remove all the handles from inside surface of the drawer front panels.
11. Re-install the handle on the correctly position on the drawer front panel, as illustrated in FIGURE 9.
FIGURE 9A
Handle
Phillips
Head Bolt
Phillips
Head Bolt
FIGURE 9B
6 11
/
