ASSEMBLY INSTRUCTIONS
1. Place the upper side rails (D) up on a flat surface.
2. Place the Long guardrail (E1) and Short guardrail (E2) on the top of the upper side rails (D), then attach the metal bracket 1 (11) and metal bracket 2
(12) into the side rails and guardrails. Insert screw (10) provided to pass through hole on metal bracket 1 (11) and metal bracket 2 (12) to the pre-drill
hole on side rails and guardrail. Refer to FIGURE 1 & FIGURE 2.
IMPORTANT
These bed parts can be cumbersome and heavy, therefore the assistance of two or more people is recommended in order to prevent personal injury
and ensure the bed parts are not damaged during the assembly process.
FIGURE 1
10
12
FIGURE 2
Fig. 2
Fig. 2
Fig. 1
Fig. 1
E2
E1
D
D
10
11
NOTE
: The short guardrail can be installed at either end of either upper side rail, depending on your desired ladder location. To install the short
guardrail on the left side of the upper side rail, refer to option A & B. Option C & D show the short guardrail installed on the right of the upper side rail.
OPTION A
OPTION B
OPTION C
OPTION D
4 11
/
