Lock
Washer
B
C
DETAIL C
DETAIL D
Hex Nut
Plain
Washer
Allen Bolt
(BB)
Allen Wrench
Open Wrech
Hex Nut
Lock Washer
Plain Washer
MATTRESS
SUPPORT
Stabilizer Rail
HARDWARE NEEDED FOR STEP 2
(BB) 1/4" x 1 1/4" Allen Bolt = 8 pcs
Lock Washer = 8 pcs
Plain Washer = 8 pcs
Hexagonal Nut = 8 pcs
STEP 2
MATTRESS SUPPORT ARM ASSEMBLY
STABILIZER RAIL ASSEMBLY
MATTRESS HEIGHT ADJUSTMENT
Open Wrench = 1 pc
Allen Wrench = 1 pc
STEP 2.1
Lay Mattress Support flat with Stabilizer Rail on each side.
NOTE:
Each end of the arm of the Mattress Support has a hole for the
bolt to pass through that corresponds to the holes located in the frame of
the Mattress Support.
STEP 2.2
Insert the bolt into the desired hole of the frame through the hole on the
arm support. Fasten the bolt with plain washer, lock washers &
hexagonal nut provided. Repeat procedure on other arms of the Mattress
Support. See
DETAIL C
.
WARNING:
Set the Mattress Support to the desired height by adjusting
the Support Arms. The Mattress Support should be at its highest setting
for newborns, then adjusted to the lower positions as the child grows and
becomes mobile. Once the child is able to stand, the Mattress Support
should be at its lowest position.
STEP 2.3
Install the Stabilizer Rail at ends of the arm support, as illustrated in
DETAIL D
.
Allen Bolt
(BB)
Allen Bolt
(BB)
Allen Bolt
(BB)
Allen Bolt
(BB)
Allen Wrench
7/10
Summary of Contents for MARCELLE
Page 1: ...1 1 0 1 10 ...
