background image

Page 2 of 12

Never use plastic shipping bags or other plastic film as mattress covers because they can cause suffocation. 

Infants can suffocate in gaps between crib sides and a mattress that is too small.

To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep, unless

otherwise advised by your physician.

Strangulation Hazard: 

Strings can cause strangulation! DO NOT place items with a string around a child's neck, such as hood strings or 

pacifier cords. DO NOT suspend strings over a crib or attach strings to toys.

To help prevent strangulation, tighten all fasteners. A child can trap parts of the body or clothing on loose fasteners.

DO NOT place crib near window where cords from blinds or drapes may strangle a child.

Fall Hazard: 

When child is able to pull to a standing position, set mattress to lowest position and remove bumper pads,  large 

toys and other objects that could serve as steps for climbing out.

When child is able to climb out or reaches the height of 35 inches (89 cm), the crib shall no longer be used, and 

the child should be placed in a youth or regular bed.

Check this product for damaged hardware, loose joints, missing parts or sharp edges before and after assembly  

and frequently during use. DO NOT use crib if any parts are missing, damaged or broken. 

Contact customer service at 1-800-762-1751 for replacement parts and instructional literature if needed. 

DO NOT substitute parts.

DO NOT use a water mattress with this crib.

If refinishing, use a non-toxic finish specified for children's products.

Follow warnings on all products in a crib.

Never use plastic shipping bags or other plastic film as mattress covers because they can cause suffocation.

Infants can suffocate in gaps between crib sides and a mattress that is too small.

  

WARNING:

 Infants can suffocate on soft bedding. Never add a pillow or comforter. Never 

place additional padding under an infant. 

       WARNING: 

Failure to follow these warnings and the assembly instructions could result 

in serious injury or death.

LEYTON UPHOLSTERED CRIB 

Summary of Contents for LEYTON G0037 - 1













Reviews: