EE
STEP 5
TODDLER RAIL ASSEMBLY
DETAIL J
DETAIL K
STEP 5.1
Remove the front rail panel of the crib by loosening all the bolts
installed.
STEP 5.2
Gently tilt the crib and release the bolts underneath the metal
brackets holding the stabilizer rails.
STEP 5.3
Gently remove the mattress support and slightly loosen the bolt
at the back of the headboard that enough to set the toddler rail
in-between end rail panel.
NOTE:
Fill the holes located on the top of the end rail panel by
inserting bolt (EE) provided.
STEP 5.4
On inside face of both end rail panels there is a cavity for the
hook which corresponds to the hook on both ends of the toddler
rail. Align and insert the hook of the toddler rail into the cavity of
the end rail panel, as in
DETAIL J
.
NOTE:
If mattress support is not in the lowest position, unscrew
mattress support bolts and move the lowest position.
STEP 5.5
Repeat step 3. Installation of stabilizer rails into the end rail
panel (
DETAIL K
).
After assembly, re-tighten all bolts to a snug fit.
Allen Wrench = 1 pc.
(EE) 1/4" x 1/2" Allen Bolt = 2 pcs.
HARDWARE FOR STEP 5:
EE
EE
10/11
Summary of Contents for BELLINA
Page 1: ...1 1 1 11...
